View source for Nokia IP330

This page lists the coreboot status of the Nokia IP530 mainboard. It's maintained by [[User:MBertens|Marc Bertens]].


The Nokia IP330 is originally a Firewall that runs on the proprietary IPSO operating system of Nokia, it was based in the FreeBSD operating system. There is as far as I known no CD support in the orginal BIOS.

The System has no VGA, all console activity must be done through a serial console.
At the front the following can be found;

* Power LED
* Fault LED
* 2 Serial interfaces COM1 and COM2
* 3 Ethernet RJ45 sockets
* Reset button
* 1 Compact PCI slot

At the back the following can be found;

* EURO Power connector
* Power switch
* Three FANs for system unit cooling 
* One FAN for CPU cooling


== Development status ==

The current development status is; No coreboot running yet



== Hardware status ==

{{Status|

|CPU_status = OK
|CPU_comments = PIII SL5DV (1000 / 256 / 133 / 1.75V)
|CPU_L1_status = OK
|CPU_L1_comments = CPU: L1 I cache: 16K, L1 D cache: 16K
|CPU_L2_status = OK
|CPU_L2_comments = L2 cache is standard for the P3-68X models
|CPU_L3_status = N/A
|CPU_multiple_status = N/A
|CPU_multicore_status = N/A
|CPU_virt_status = N/A

|RAM_EDO_status = N/A
|RAM_SDRAM_status = OK
|RAM_SDRAM_comments = upto 4 single sided 128Mb or 4 dual sided 256Mb
|RAM_SODIMM_status = N/A
|RAM_DDR_status = N/A
|RAM_DDR2_status = N/A
|RAM_DDR3_status = N/A
|RAM_dualchannel_status = N/A
|RAM_ecc_status = WIP
|RAM_ecc_comments = Not yet supported by the coreboot 440BX code, but it's on our TODO list.

|IDE_status = OK
|IDE_comments = Primary and secondary controllers, the primary controller has a Compact Flash slot attached on board, as primary drive.
|IDE_25_status = N/A
|SATA_status = N/A
|USB_status = OK
|USB_comments = The USB is not routed to any connector, u can be picked up from the board it self, there is an instruction below on this wiki-page how to do this
|Onboard_VGA_status = N/A
|Onboard_ethernet_status = OK
|Onboard_ethernet_comments = Four intel 21143PD controllers.
|Onboard_audio_status = N/A
|Onboard_modem_status = N/A
|Onboard_firewire_status = N/A
|Smartcard_status = N/A
|Onboard_CF_status = OK
|Onboard_CF_comments = Is wrired are primary drive on primary IDE controller.
|Onboard_PCMCIA_status = OK
|Onboard_PCMCIA_comments = Texas Instruments PCI1225 PCMCIA/Cardbus controller
|Onboard_SCSI_status = N/A

|ISA_cards_status = N/A
|AMR_cards_status = N/A
|Mini_PCI_cards_status = N/A
|PCIX_cards_status = N/A
|PCI_cards_status = OK
|PCI_cards_comments = Tested: With 4 Ethernet adapter card of Nokia (Compact-PCI slots)
|AGP_cards_status = N/A
|PCIE_cards_status = N/A
|PCIE_x1_status = N/A
|PCIE_x2_status = N/A
|PCIE_x4_status = N/A
|PCIE_x8_status = N/A
|PCIE_x16_status = N/A
|PCIE_x32_status = N/A
|HTX_status = N/A

|Floppy_status = N/A
|COM1_status = OK
|COM2_status = OK
|PP_status = N/A
|PS2_keyboard_status = OK
|PS2_keyboard_comments = Internal 4 pin connector J-KBD
|PS2_mouse_status = N/A
|Game_port_status = N/A
|IR_status = N/A
|Speaker_status = N/A
|DiskOnChip_status = N/A

|Sensors_status = WIP
|Watchdog_status = N/A
|CAN_bus_status = N/A
|CPUfreq_status = N/A
|Powersave_status = N/A
|ACPI_status = No
|ACPI_comments = There's no ACPI implementation for this board, but it's on our TODO list.
|SMBus_status = WIP
|Reboot_status = N/A
|Poweroff_status = N/A
|LEDs_status = OK
|LEDs_comments = Special-purpose LEDs available on the board, '''Alert''' and '''Fault''' are controlled by the superio
|HPET_status = N/A
|RNG_status = N/A
|WakeOnModem_status = N/A
|WakeOnLAN_status = N/A
|WakeOnKeyboard_status = N/A 
|WakeOnMouse_status = N/A
|Flashrom_status = OK
|Flashrom_comments = Supported flashrom revision 1010 or higher.
}}