Board:gigabyte/ma785gmt: Difference between revisions

Latest revision as of 14:58, 28 October 2015

This page describes how to use coreboot on the GIGABYTE GA-MA785GMT-UD2H mainboard.

This board exists in 4 versions: v1.0, v1.1, v1.3 and v3.3.

This documentation applies to v1.1. If you have a different version of the board, YMMV.

The board ships with two BIOS chips, see Gigabyte_Dual_bios for details.

The M_BIOS chip is a Macronix MX25L8005.

@@ Line 1: / Line 1: @@
+This page describes how to use coreboot on the [http://www.gigabyte.com/products/product-page.aspx?pid=3274 GIGABYTE GA-MA785GMT-UD2H] mainboard.
 This board exists in 4 versions: v1.0, v1.1, v1.3 and v3.3.
 This documentation applies to [http://www.gigabyte.com/products/product-page.aspx?pid=3274 v1.1]. If you have a different version of the board, YMMV.
-==GA-MA785GMT-UD2H==
+== Dual BIOS ==
-==Dual BIOS==
+The board ships with two BIOS chips, see [[Gigabyte_Dual_bios]] for details.
-This board has a dual bios chip. Both chips are 8Mbit; the main bios is called M_BIOS, the backup bios B_BIOS. Gigabyte claims the backup bios can not be flashed by the user. It contains code that will overwrite M_BIOS if it determines that M_BIOS is corrupted.
 The M_BIOS chip is a [http://www.mct.net/download/macronix/mx25l8005.pdf Macronix MX25L8005].
-If you flash coreboot into M_BIOS and something goes wrong, you can force B_BIOS to boot and reflash M_BIOS by bridging pins 4 (GND) and 7 (#HOLD) on the M_BIOS chip, powering up the machine, and then releasing your bridge. The B_BIOS will take over at that point - you will hear a beep, and see the B_BIOS boot and forcibly re-flash M_BIOS.