Memtest86: Difference between revisions

Latest revision as of 20:55, 9 October 2012

Memtest86 is a program which checks your RAM modules.

It can be run from within GRUB, but also as a coreboot payload (i.e. included in your ROM chip).

Building

Memtest86

$ mkdir foo
$ cd foo
$ wget http://www.memtest86.com/memtest86-3.5.tar.gz
$ tar xfvz memtest86-3.5.tar.gz
$ cd memtest86-3.5

(Optional: edit config.h and set #define SERIAL_CONSOLE_DEFAULT 1 for serial support)

$ make

The file memtest is your final payload which you can use with coreboot, either on real hardware or in a QEMU image.

Memtest86+

Prerequisite: on non-i386 hosts be sure to have the i386 libc installed (e.g. libc6-dev-i386).

$ wget http://www.memtest.org/download/4.20/memtest86+-4.20.tar.gz
$ tar xfvz memtest86+-4.20.tar.gz
$ cd memtest86+-4.20

(Optional: edit config.h and set #define SERIAL_CONSOLE_DEFAULT 1 for serial support)

$ make

coreboot

Finally, you have to build coreboot with Memtest86 as payload:

$ cd ..
$ svn co svn://coreboot.org/coreboot/trunk coreboot
$ cp memtest86-3.5/memtest coreboot/payload.elf
$ cd coreboot
$ make menuconfig

Now enter the Payload menu and select Payload type and then An ELF executable payload file. Then, exit the menu, save your settings, and build coreboot:

$ make

The file build/coreboot.rom is your final coreboot image, which also contains the payload.

Running Memtest86 in QEMU

For running the coreboot+Memtest86 image in QEMU, you need a patched version of vgabios-cirrus.bin in your build directory first:

$ cd build
$ wget http://www.coreboot.org/images/0/0d/Vgabios-cirrus.zip
$ unzip Vgabios-cirrus.zip
$ cd ..

You can now run coreboot and Memtest86 in QEMU:

qemu -L build -hda /dev/zero -serial stdio

Ready-made QEMU image

Please follow these instructions if you want to try out coreboot and Memtest86 in QEMU.

I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

@@ Line 3: / Line 3: @@
 '''[http://www.memtest86.com/ Memtest86]''' is a program which checks your RAM modules.
-It can be run from within GRUB, but also as a coreboot payload (i.e. included in your ROM chip).
+It can be run from within GRUB, but also as a coreboot [[Payloads|payload]] (i.e. included in your ROM chip).
 == Building  ==
@@ Line 9: / Line 9: @@
 === Memtest86 ===
-  $ mkdir foo
+  $ '''mkdir foo'''
-  $ cd foo
+  $ '''cd foo'''
-  $ wget http://www.memtest86.com/memtest86-3.4.tar.gz
+  $ '''wget http://www.memtest86.com/memtest86-3.5.tar.gz'''
-  $ tar xfvz memtest86-3.4.tar.gz
+  $ '''tar xfvz memtest86-3.5.tar.gz'''
-  $ cd memtest86-3.4
+  $ '''cd memtest86-3.5'''
 (Optional: edit '''config.h''' and set '''#define SERIAL_CONSOLE_DEFAULT 1''' for serial support)
-  $ make
+  $ '''make'''
-The file '''memtest''' is your final payload which you can use with coreboot (v2 or v3), either on real hardware or in a QEMU image.
+The file '''memtest''' is your final payload which you can use with coreboot, either on real hardware or in a [[QEMU]] image.
+=== Memtest86+ ===
+Prerequisite: on non-i386 hosts be sure to have the i386 libc installed (e.g. libc6-dev-i386).
+ $ '''wget http://www.memtest.org/download/4.20/memtest86+-4.20.tar.gz'''
+ $ '''tar xfvz memtest86+-4.20.tar.gz'''
+ $ '''cd memtest86+-4.20'''
+(Optional: edit '''config.h''' and set '''#define SERIAL_CONSOLE_DEFAULT 1''' for serial support)
+ $ '''make'''
 === coreboot ===
-Finally, you have to build coreboot (v3 in this example) with Memtest86 as payload:
+Finally, you have to build coreboot with Memtest86 as payload:
-  $ cd ..
+  $ '''cd ..'''
-  $ svn co svn://coreboot.org/repository/coreboot-v3
+  $ '''svn co svn://coreboot.org/coreboot/trunk coreboot'''
-  $ cp memtest86-3.4/memtest coreboot-v3/payload.elf
+  $ '''cp memtest86-3.5/memtest coreboot/payload.elf'''
-  $ cd coreboot-v3
+  $ '''cd coreboot'''
-  $ make menuconfig
+  $ '''make menuconfig'''
-Now enter the '''Payload''' menu and select '''Payload type''' and then '''An ELF executable payload file'''. Now exit the menu, save your settings, and build coreboot:
+Now enter the '''Payload''' menu and select '''Payload type''' and then '''An ELF executable payload file'''. Then, exit the menu, save your settings, and build coreboot:
-  $ make
+  $ '''make'''
-The file '''build/coreboot.rom''' (or '''build/bios.bin''') is your final coreboot v3 image, which also contains the payload.
+The file '''build/coreboot.rom''' is your final coreboot image, which also contains the payload.
 == Running Memtest86 in QEMU ==
-For running the coreboot+Memtest86 image in QEMU, you need a patched version of '''vgabios-cirrus.bin''' in your '''build''' directory first:
+For running the coreboot+Memtest86 image in [[QEMU]], you need a patched version of '''vgabios-cirrus.bin''' in your '''build''' directory first:
-  $ cd build
+  $ '''cd build'''
-  $ wget http://www.coreboot.org/images/0/0d/Vgabios-cirrus.zip
+  $ '''wget http://www.coreboot.org/images/0/0d/Vgabios-cirrus.zip'''
-  $ unzip Vgabios-cirrus.zip
+  $ '''unzip Vgabios-cirrus.zip'''
-  $ cd ..
+  $ '''cd ..'''
-You can now run coreboot and Memtest86 in QEMU:
+You can now run coreboot and Memtest86 in [[QEMU]]:
-  $ qemu -L build -hda /dev/zero -serial stdio
+  qemu -L build -hda /dev/zero -serial stdio
 == Ready-made QEMU image ==
-Please follow [ these instructions] if you want to try out coreboot and Memtest86 in [[QEMU]].
+Please follow [[QEMU#coreboot_v3_.2B_Memtest86|these instructions]] if you want to try out coreboot and Memtest86 in [[QEMU]].
 {{PD-self}}