Board:apple/macbook21: Difference between revisions

From coreboot
Jump to navigation Jump to search
Line 2: Line 2:
==Status==
==Status==
Tested on MacBook2,1 (Mid 2007) 2.0GHz. Might work as well, but not tested on MacBook2,1 (Late 2006) and MacBook1,1 possibly with small code modifications.
Tested on MacBook2,1 (Mid 2007) 2.0GHz. Might work as well, but not tested on MacBook2,1 (Late 2006) and MacBook1,1 possibly with small code modifications.
Issues:
* OS X and Windows dont work yet.
Tested:
* Works with GNU/Linux and GNU/Linux-libre
Not tested:
*


==Proprietary Components==
==Proprietary Components==

Revision as of 06:45, 5 March 2014

Hardware

Status

Tested on MacBook2,1 (Mid 2007) 2.0GHz. Might work as well, but not tested on MacBook2,1 (Late 2006) and MacBook1,1 possibly with small code modifications. Issues:

  • OS X and Windows dont work yet.

Tested:

  • Works with GNU/Linux and GNU/Linux-libre

Not tested:

Proprietary Components

Code

Flashing

Is easy with the vendor BIOS version MB21.00A5.B07 (EFI 1.1) installed.

Identify Flash The Chip

Make sure flashrom can identify the flash chip:

# flashrom --verbose --programmer internal:laptop=force_I_want_a_brick >flashrom_info.log

The output should involve:

...
DMI string system-manufacturer: "Apple Inc."
DMI string system-product-name: "MacBook2,1"
DMI string system-version: "1.0"
DMI string baseboard-manufacturer: "Apple Inc."
DMI string baseboard-product-name: "Mac-F4208CAA"
DMI string baseboard-version: "PVT"
DMI string chassis-type: "Notebook"
Laptop detected via DMI.
Found chipset "Intel ICH7M" with PCI ID 8086:27b9. Enabling flash write... 
...
Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541
Found SST flash chip "SST25VF016B" (2048 kB, SPI) at physical address 0xffe00000.
Chip status register is 0x1c.
Chip status register: Block Protect Write Disable (BPL) is not set
Chip status register: Auto Address Increment Programming (AAI) is not set
Chip status register: Block Protect 3 (BP3) is not set
Chip status register: Block Protect 2 (BP2) is set
Chip status register: Block Protect 1 (BP1) is set
Chip status register: Block Protect 0 (BP0) is set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Resulting block protection : all
...
Found SST flash chip "SST25VF016B" (2048 kB, SPI).
No operations were specified.
...