Board:gigabyte/ma785gmt: Difference between revisions
No edit summary |
mNo edit summary |
||
| Line 1: | Line 1: | ||
This page describes how to use coreboot on the [http://www.gigabyte.com/products/product-page.aspx?pid=3274 GIGABYTE GA-MA785GMT-UD2H] mainboard. | |||
This board exists in 4 versions: v1.0, v1.1, v1.3 and v3.3. | This board exists in 4 versions: v1.0, v1.1, v1.3 and v3.3. | ||
This documentation applies to [http://www.gigabyte.com/products/product-page.aspx?pid=3274 v1.1]. If you have a different version of the board, YMMV. | This documentation applies to [http://www.gigabyte.com/products/product-page.aspx?pid=3274 v1.1]. If you have a different version of the board, YMMV. | ||
==Dual BIOS== | == Dual BIOS == | ||
This board has a dual | This board has a dual BIOS chip. Both chips are 8Mbit; the main BIOS is called M_BIOS, the backup BIOS is called B_BIOS. GIGABYTE claims the backup BIOS can not be flashed by the user. It contains code that will overwrite M_BIOS if it determines that M_BIOS is corrupted. | ||
The M_BIOS chip is a [http://www.mct.net/download/macronix/mx25l8005.pdf Macronix MX25L8005]. | The M_BIOS chip is a [http://www.mct.net/download/macronix/mx25l8005.pdf Macronix MX25L8005]. | ||
If you flash coreboot into M_BIOS and something goes wrong, you can force B_BIOS to boot and reflash M_BIOS by bridging pins 4 (GND) and 7 (#HOLD) on the M_BIOS chip, powering up the machine, and then releasing your bridge after a few seconds. The B_BIOS will take over at that point | If you flash coreboot into M_BIOS and something goes wrong, you can force B_BIOS to boot and reflash M_BIOS by bridging pins 4 (GND) and 7 (#HOLD) on the M_BIOS chip, powering up the machine, and then releasing your bridge after a few seconds. The B_BIOS will take over at that point — you will hear a beep, and see the B_BIOS boot and forcibly re-flash M_BIOS. | ||
Revision as of 17:31, 7 November 2010
This page describes how to use coreboot on the GIGABYTE GA-MA785GMT-UD2H mainboard.
This board exists in 4 versions: v1.0, v1.1, v1.3 and v3.3.
This documentation applies to v1.1. If you have a different version of the board, YMMV.
Dual BIOS
This board has a dual BIOS chip. Both chips are 8Mbit; the main BIOS is called M_BIOS, the backup BIOS is called B_BIOS. GIGABYTE claims the backup BIOS can not be flashed by the user. It contains code that will overwrite M_BIOS if it determines that M_BIOS is corrupted.
The M_BIOS chip is a Macronix MX25L8005.
If you flash coreboot into M_BIOS and something goes wrong, you can force B_BIOS to boot and reflash M_BIOS by bridging pins 4 (GND) and 7 (#HOLD) on the M_BIOS chip, powering up the machine, and then releasing your bridge after a few seconds. The B_BIOS will take over at that point — you will hear a beep, and see the B_BIOS boot and forcibly re-flash M_BIOS.