Coreinfo: Difference between revisions
mNo edit summary |
m (Fixed subversion commands to be git) |
||
Line 19: | Line 19: | ||
The coreinfo payload uses [[libpayload]], thus you need to get that first and build it: | The coreinfo payload uses [[libpayload]], thus you need to get that first and build it: | ||
$ ''' | $ '''git clone http://review.coreboot.org/p/coreboot''' | ||
$ '''cd libpayload''' | $ '''cd coreboot/payloads/libpayload''' | ||
$ '''make menuconfig''' | $ '''make menuconfig''' | ||
$ '''make install''' | $ '''make install''' | ||
Line 28: | Line 28: | ||
You can then get coreinfo itself and build it: | You can then get coreinfo itself and build it: | ||
$ '''cd | $ '''cd coreboot/payloads/coreinfo''' | ||
$ '''make menuconfig''' | $ '''make menuconfig''' | ||
$ '''make''' | $ '''make''' | ||
Line 40: | Line 38: | ||
Finally, you have to build coreboot with coreinfo as payload: | Finally, you have to build coreboot with coreinfo as payload: | ||
$ ''' | $ '''cp coreboot/payloads/coreinfo/build/coreinfo.elf coreboot/payload.elf''' | ||
$ '''cd coreboot''' | $ '''cd coreboot''' | ||
$ '''make menuconfig''' | $ '''make menuconfig''' | ||
Line 54: | Line 50: | ||
== Running coreinfo in QEMU == | == Running coreinfo in QEMU == | ||
For running coreboot+coreinfo image in [[QEMU]], you need | For running coreboot+coreinfo image in [[QEMU]], you need | ||
1 Previously described steps (build coreboot image for QEMU) | |||
2 Patched version of '''vgabios-cirrus.bin''' in your '''build''' directory: | |||
$ '''cd build''' | $ '''cd build''' | ||
Line 63: | Line 63: | ||
You can now run coreinfo in [[QEMU]]: | You can now run coreinfo in [[QEMU]]: | ||
$ qemu -L build -hda /dev/zero -serial stdio | $ qemu-system-i386 -L build -hda /dev/zero -serial stdio | ||
== Ready-made coreinfo QEMU image == | == Ready-made coreinfo QEMU image == |
Revision as of 09:24, 10 December 2012
coreinfo is a small informational payload for coreboot. Currently, it can display CPU information, PCI information, coreboot table information, show an NVRAM dump, as well as a RAM dump.
Screenshots
-
CPU info
-
PCI info
-
coreboot table
-
NVRAM dump
-
RAM dump
Building coreinfo
libpayload and coreinfo are in the payloads/ directory of the coreboot tree. If you have already checked out the tree, you can skip the svn co steps below.
libpayload
The coreinfo payload uses libpayload, thus you need to get that first and build it:
$ git clone http://review.coreboot.org/p/coreboot $ cd coreboot/payloads/libpayload $ make menuconfig $ make install
coreinfo
You can then get coreinfo itself and build it:
$ cd coreboot/payloads/coreinfo $ make menuconfig $ make
The file build/coreinfo.elf is your final coreinfo payload which you can use with coreboot, either on real hardware or in a QEMU image.
coreboot
Finally, you have to build coreboot with coreinfo as payload:
$ cp coreboot/payloads/coreinfo/build/coreinfo.elf coreboot/payload.elf $ cd coreboot $ make menuconfig
Now enter the Payload menu and select Payload type and then An ELF executable payload file. Then, exit the menu, save your settings, and build coreboot:
$ make
The file build/coreboot.rom is your final coreboot image, which also contains the coreinfo payload.
Running coreinfo in QEMU
For running coreboot+coreinfo image in QEMU, you need
1 Previously described steps (build coreboot image for QEMU)
2 Patched version of vgabios-cirrus.bin in your build directory:
$ cd build $ wget http://www.coreboot.org/images/0/0d/Vgabios-cirrus.zip $ unzip Vgabios-cirrus.zip $ cd ..
You can now run coreinfo in QEMU:
$ qemu-system-i386 -L build -hda /dev/zero -serial stdio
Ready-made coreinfo QEMU image
If you don't want to build libpayload, coreinfo, and coreboot from source, you can also use the ready-made coreinfo QEMU image by following the instructions on that page.
I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.
In case this is not legally possible: |