NetBSD: Difference between revisions

Revision as of 17:48, 9 February 2010

This page documents coreboot usage with NetBSD. It is probably terser than it could be, as it mostly just describes differences from the more-commonly-documented Linux procedures.

building coreboot on NetBSD

GNU make is required to build coreboot, install it from pkgsrc/devel/gmake.

coreboot v4

Use coreboot/util/crossgcc, you may have to work around a issue with the path to the GCC sources.

building SeaBIOS on NetBSD

Build SeaBIOS with the previously mentioned crossgcc. You may need to (temporarily) use pkgsrc/shells/bash as your shell.

using NetBSD/x86 with coreboot

interrupt routing

Legacy interrupt routing (the PCI interrupt line register) is traditionally not implemented by coreboot on many mainboards. MPBIOS or ACPI will be required otherwise.

NetBSD does not (without patching) search for a MPBIOS floating pointer at the location coreboot usually places it. SeaBIOS does relocate this pointer structure however.

BIOS calls

(This section is probably only relevant when not loading via SeaBIOS.)

NetBSD/i386 GENERIC still makes some BIOS calls after boot(8):

isapnp(4)
mca(4)

Removal of these subsystems from your kernel config(5) file removes these calls.

Due to the nature of x86_64, BIOS calls on NetBSD/amd64 are not a problem, as they cannot be made from long-mode.

coreboot-related utilities

Both nvramtool and flashrom are in pkgsrc-wip.

I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

@@ Line 3: / Line 3: @@
 == building coreboot on NetBSD ==
 GNU make is required to build coreboot, install it from pkgsrc/devel/gmake.
-=== coreboot v2 ===
-As of revision 3363 only one change needs to be made.
-<source lang="text">
-Index: src/config/Config.lb
-===================================================================
---- src/config/Config.lb        (revision 3389)
-+++ src/config/Config.lb        (working copy)
-@@ -5,7 +5,7 @@
- makedefine CPP:= $(CC) -x assembler-with-cpp -DASSEMBLY -E
- makedefine LIBGCC_FILE_NAME := $(shell $(CC) -print-libgcc-file-name)
--makedefine GCC_INC_DIR := $(shell LC_ALL=C $(CC) -print-search-dirs | sed -ne "s/install: \(.*\)/\1include/gp")
-+makedefine GCC_INC_DIR := /usr/include
- makedefine CPPFLAGS := -I$(TOP)/src/include -I$(TOP)/src/arch/$(ARCH)/include -I$(GCC_INC_DIR) $(CPUFLAGS)
- makedefine CFLAGS := $(CPU_OPT) $(DISTRO_CFLAGS) $(CPPFLAGS) -Os -nostdinc -nostdlib -fno-builtin  -Wall
-</source>
-=== coreboot v3 ===
-<source lang="text">
-Index: Makefile
-===================================================================
---- Makefile    (revision 690)
-+++ Makefile    (working copy)
-@@ -106,7 +106,7 @@
- # Note: This _must_ come after 'CC' is set for the second time in this
- # Makefile (see above), otherwise the build would break if 'gcc' isn't
- # the compiler actually used for the build (e.g. on cross compiler setups).
--CFLAGS += -nostdinc -isystem `$(CC) -print-file-name=include`
-+CFLAGS += -nostdinc -isystem /usr/include
- include lib/Makefile
- include device/Makefile
-</source>
-On NetBSD libintl is required to build kconfig.
-<source lang="bash">
-gmake INTLLIBS=-lintl menuconfig
-</source>
+=== coreboot v4 ===
+Use coreboot/util/crossgcc, you may have to work around a issue with the path to the GCC sources.
 == building [[SeaBIOS]] on NetBSD ==
-A change is required to '''seabios/Makefile''', then gmake can be used to build SeaBIOS in the normal way.
+Build SeaBIOS with the previously mentioned crossgcc. You may need to (temporarily) use pkgsrc/shells/bash as your shell.
-<source lang="text">
--$(Q)/bin/echo -e '$(foreach i,$2,#include "../$i"\n)' > $3.tmp.c
-+$(Q)echo -e '$(foreach i,$2,#include "../$i"\n)' > $3.tmp.c
-</source>
 == using NetBSD/x86 with coreboot ==